Plumber in Reseda, California

Plumber in Reseda: Our houses heavily depend on the water system and piping. They are like the digestive system of the house, and sometimes, the worst can happen. Pipes freeze and burst, repeated water leaks occur, and your water bill goes up. There is also corrosion buildup and slabs leaking. These are all indications that it is time to hire a professional handyman plumber.

If you are searching for "handyman near me" in Reseda, then HandymanReseda is the answer for you!

Handymanreseda provides the very best handyman service in Reseda, California. We can help you if you have any questions about your plumbing or if you think your home may need re-piping. We will provide you with a reasonable and fair estimate, whereas our skilled plumbers will help pinpoint the problem with 100% transparency.

We also specialize in commercial plumbing in Reseda. Our various services include painting, plumbing, home repairing, kitchen remodeling, bathroom remodeling, flooring, window installation, and electrical installation. 


Plumbers are tradespeople who specialize in the installation and maintenance of plumbing systems. 

Historically, the Roman Empire is the origin of the word "plumber." Roman roofs used lead as conduits and drain pipes, and some were also covered with it. Lead was also used to make baths and piping. Plumbum is Latin for lead, and anyone who used lead in medieval times was called a plumber. 

A person skilled in working with lead was initially known as a plumbarius which was later shortened to a plumber.


Plumber in Reseda

You should not ignore plumbing problems such as water leakage or defective faucets; you should not wait to correct the problem. The next step is frustration, broken fixtures, appliances, and a smaller bank balance.

We recommend consulting a professional plumber in Reseda to avoid confusion, even if your skills are sufficient to handle plumbing problems independently. There are always pros and cons to calling a professional plumber, but it is not a bad idea to get a second opinion.

Although doing plumbing repairs yourself may be possible, hiring a professional is always a good idea. Although you might save money by doing the repairs yourself, it's not guaranteed that the job will go smoothly the first time. Often, this is not the case. You may need to buy additional tools, or you might end up causing more damage. Nearly all Reseda homeowners who have had their bathtub or shower for a while will notice it starting to wear. The bathtub or shower enclosure can be damaged. The faucet, shower head, and plumbing could also become damaged. Repairs may be necessary due to leaks, loose knobs, and other problems. An expert can diagnose and repair the problem quickly and accurately. It doesn't matter if it is a small problem; hiring a professional is the best option.


To become a skilled plumber, one requires years of experience and training. Some common plumbing skills and tasks:

  1. Drawings and specifications needed to plan the water supply, waste, and venting systems.
  2. Correctly diagnosing the causes of plumbing problems and faults, as well as detecting them.
  3. Installation, repair, and maintenance of domestic, commercial, or industrial plumbing fixtures and system
  4. Locating and marking the positions of pipe connections, passage holes, fixtures, and other fittings in walls and floors
  5. Measuring, cutting, bending, and threading pipes with hand or power tools.
  6. Joining pipes and fittings together with soldering techniques.
  7. Using correct water pressure gauges and air pressure gauges to test pipes for leaks
  8. Paying attention to safety and legal requirements
  9. Ensuring that all security measures are met, and regulations for building construction are followed.


In the United States, individual states have their specific taxing and licensing schemes for plumbers. Some states permit master and journeymen plumbers separately, while others only license master plumbers. Plumbers must have the required experience and training to become licensed. Most importantly, they must pass a certification exam. The federal government does not grant plumber licenses.

Apprenticeships are the most common way for plumbers to get their training, which combines classroom instruction with on-the-job training. A license is required to work in your state.

Apprenticeship: Apprenticeships can be sponsored by employers and trade unions. These apprenticeships last for four to five years and provide 2,000 hours of classroom instruction and on-the-job training. To be admitted to a program, you will need a diploma from a high school or equivalent. You will be taught about safety, local codes, blueprint reading, and safety.

License: Plumbers must have a license to work in all 50 states and most municipalities in the United States. You will need to have two to five years of experience, depending on the location of your license.


Our plumbers have soft skills to work in this job, acquired through life experience or innate strengths. These strengths will help us succeed in providing the best plumbing services in Reseda.

Listening skills: Our plumbers always ensure to listen to customers and understand their problems attentively.

Troubleshooting: Our skilled plumbers listen to the complaint and then determine its cause based on the circumstances.

Critical Thinking: They make sure to weigh all possible solutions before deciding on the best.

Verbal communication: We know that customers must understand what the work entails and how it will cost them, so communication is the key.

Physical Strength: Plumbers should lift heavy equipment and tools, and our plumbers are just the best fit.


No matter how pristine your home is, plumbing issues can and will occur at any time. The older the house, the more likely it is that plumbing problems will arise. Due to the use of outdated materials, old plumbing is more susceptible to expensive repairs and replacements. Galvanized piping and Orangeburg piping are two prime examples. These materials can cause homeowners a variety of plumbing problems.

Galvanized pipes were used in the 1960s, made of steel pipes coated with zinc. Galvanized pipes were an alternative to lead pipes, and they were designed to resist corrosion and rust, but they corroded over time when exposed to water.

Galvanized pipes:

  1. Potentially pose health risks, including releasing lead, rust, and other debris into your drinking water supply.
  2. Continue to deteriorate and erode, which can affect your water pressure.
  3. Cause several water leaks, busted pipes, including water leakage and full-blown pipes.

Orangeburg pipes are produced from timber pulp and sealed in coal tar and were designed to be economical. Orangeburg pipes were widely used until the 1970s because of their easy accessibility and ability to collapse. Both Orangeburg and galvanized pipes need replacement because broken water pipes lead to the need for new pipes. 

Broken pipes can be caused by corrosion, extreme cold, high water pressure, or moving pipes. It is crucial to immediately shut off the water supply if you find broken or leaky pipes. It is important to warrant that there are no electrical outlets or wiring damaged by water. You may fix the problem until an electrician arrives temporarily, or you can contact us and have one of our trained plumbers take a look.


Re-piping specialists use copper or PEX pipes in modern homes. While some plumbing companies specialize exclusively in copper re-piping, others are more skilled at PEX re-piping. Both have many benefits that go beyond those of the older materials. 

Copper piping: Copper pipes are great for plumbing because they are strong, durable, resistant to corrosion and harmful bacteria. Copper pipes are also reliable, long-lasting, and versatile. But, copper is also more expensive than most other materials, such as PEX piping. Copper piping is also labor-intensive because copper fittings need to be soldered.

Copper is known to resist corrosion but can corrode under the right conditions. Copper pipes can also freeze or burst depending on the temperature.

PEX piping: PEX piping has been gaining popularity over time. Because of its adaptability and endurance, it is becoming more popular in commercial and domestic plumbing. It comes in a variety of lengths and can be color-coded to make it easy to install. PEX is also significantly cheaper than copper and more cost-efficient. Because it is flexible, PEX is less susceptible to freezing and more resistant to corrosion.

PEX has some drawbacks. It is not suitable for outdoor plumbing systems, and it is not recyclable. The material is also not anti-bacterial, which can lead to contamination.


  • Draining issues:

The simple force of gravity is what controls your home's drainage. It's not the water flowing down your pipes that causes water to clog your drains. They go down your drain, and gravity takes control. The pipes below the ground are angled at a downward angle to reach the sewer line. Anything you pour down there will not pass if something blocks them.

It is easy to see when your drain has become clogged. This list will tell you if your drain is clogged. Sometimes, other signs and symptoms can also be present.

Slow draining water from your toilet, sink, or shower is a sign of a blocked drain. Slow draining is a sign that the drain is not blocked completely. However, it can still be blocked by enough waste and water to prevent it from draining easily.

Your drains can gurgle too, which is usually caused by backed-up water or waste.

A foul odor coming from your drainage system may not be noticeable immediately, but this could indicate that food waste or other debris has been clogging your drains. It's time for you to unclog it if you can smell it.

Everything that goes down is going back up again, the second most obvious sign that your drains have become clogged. If the water you send down keeps going up, this is a sign that your drains have become blocked and are looking for a way out; it is a sign that you need drain repair in Reseda.

  • Faucet issues:

Leaking faucets are one of the most common plumbing problems homeowners face. The faucets are more frequently used than any other fixtures and appliances in the house, so most leaks go unnoticed unless there is an emergency, causing a lot of water waste and can cost you hundreds of dollars to fix it.

When you are a homeowner, it is important to be aware of small details, such as water leaks or drips. Despite not having a lot of plumbing training, you should be aware of many causes of faucet problems.

  1. Warned or damaged components: The type of faucet you have will determine the part that needs to be repaired or replaced. There are four types of faucets: ceramic disk, cartridge, ceramic disk, and ball. Rubber washers, O rings, inlet and exterior seals, valve seats, and rubber washers are all subject to repair. The internal hardware components should be working properly, regardless if it is a kitchen or bathroom faucet. Hence, replacing worn washers, cracked seals, and loose O-rings is important, which a licensed plumber can do.
  2. Unsecured Parts: Parts can become loose over time, just like with any other appliance or fixture. Faucets are no different. All parts of a faucet are interdependent. However, if any one of the parts becomes loose, all others will follow, causing leaks or disruptions to the water flow. If loose, unsecured pipes, valves, or clamps are not secured, they can cause serious leakage. Reckon & Reckon can provide a free estimate depending on the severity of your situation. We are experts in sink faucet repair as well as new faucet installation in Los Angeles.
  3. Broken Piping: As time passes, fittings can become loose, and cracks or holes in the piping can form, causing water leakage slowly. Damaged piping is an integral part of your water system and should be assessed by professionals.
  4. Do-it-yourself faucet installation or repair mistake: Installing or repairing a faucet yourself can be a hassle, leading to leaks from loose connections, valves, and screws, under or over tightening seals, or damaged pipes due to mishandling. We recommend that you leave faucet installation to us professionals to avoid any headaches or costly repairs down the road.
  5. Sediment Buildup: Sediment, mineral deposits, and corrosion can cause damage to pipes, valves, seals, and other internal mechanisms leading to corrosion, cracking, crumbling, and dripping, which can lead to decreased water pressure and leaking. It is easy to remove sediment from your faucet. Chemical treatments can be helpful to remove sediment from your faucet, but you might need to disassemble your faucet. In such a case, you should consult a professional.
  • Washroom issues:

Most showers that we fix are damaged or broken from wear and tear. Even though things eventually break, it doesn't mean that they need to be replaced. A shower repair can save you money and is not as expensive as replacing the entire system. You can re-plumber, refinish, or repair older showers in many different ways. Leaking or broken shower pans are one of the most common problems with showers. Shower pans are a basin at the bottom of showers. It helps to catch water and allows it to drain into the drain. A professional plumber can replace or repair shower pans.

  1. Common Problems with Bathtubs: Leakage is one of many problems that bathtubs can have. Slow drains, malfunctioning handles, cracks, and other damage to the tub's surface can all be problems. These issues can all be fixed easily, and you don't have to replace expensive tubs. The experts at HandymanReseda can fix it for you, giving you peace of mind and preventing water leaks. They will make sure to restore your bathtub to its original condition.
  2. Slow filling: Slowly filling the toilet can cause frustration and be very frustrating. There are many causes of slow-filling toilets. Your water system can become clogged over time, and the buildup may be found in the supply line, at the valve's body, or on the wall. It can slow down the filling speed. In this instance, flushing out the debris from the system is the best solution. If that fails, the best option is to replace or repair the valve. Older valves can show signs of wear that can slow down the tank's filling. It may be possible to replace the malfunctioning part of the valve if you can identify it, which could be the fill valve, the replacement seal, or the top-cap assembly. It is often a good idea to replace the whole valve, even if other parts show wear.
  3. Non-Flushing: Non-flushing toilets can be as difficult to maintain as ones that don't fill. A problem in the flapper most often causes Non-flushing toilets, an internal component of the tank that allows water to flow into the bowl from its tank. It then closes when it reaches the desired level. Toilets that require you "jiggling" the handle to flush can have a problem with a poorly seated flapper. If the problem persists, the flapper's chain to the handle may have broken or become loose.
  4. Running Toilet: A running toilet is usually because either there is a problem in the flapper (a non-flushing toilet) or a valve problem (a slow-filling toilet). Toilet leaking repair is also possible. However, it's much more obvious than the actual problem.
  5. Weak Flush: A problem with the toilet bowl filling at its maximum level usually causes weak flushing. This type of toilet flushing repair may require replacing the flapper valve, refill valve, or float. Sometimes, a weak flush can be caused by a DIY homeowner who used inferior parts to replace defective ones.
  6. Toilets that are clogged or overflowing: One reason for overflowing toilets is that the flapper valve has failed to seal. The ball flotation could be malfunctioning or flushing the toilet too often. To prevent leaking water into the toilet from the mainline, the homeowner should shut off the water supply at the wall.
  7. New Toilet Installation: As your toilet ages, repairs will likely become more frequent. Although a new toilet may seem disruptive to your daily life, a professional plumber will make it a seamless process. It will also be less expensive than replacing an older toilet that is constantly inoperable.

Common Issues in Air Duct Cleaning

Dirty air ducts can cause serious health problems, including respiratory issues. A dirty air duct can also become a breeding ground for insects and rodents that can carry diseases. These creatures can also get into homes and eat food, making them a threat to the health of the inside.

The best way to avoid biological contaminants from forming in your air ducts is to keep moisture under control. This means that you should always remove standing water and ensure that your drain pans slope toward the drain. Additionally, it is important to keep humidifiers clean and well-maintained. In addition, the design and construction of your air handling unit must make it easy to access the heat exchange components and drain pans.

Dust is another issue associated with air duct cleaning. Dust can accumulate in your ducts and cause an unpleasant odor. A good air duct cleaning can remove all this dirt, keeping your air fresh and smelling fresh. Even though dust is not fun, it is an essential task.

If you suspect that your ducts are contaminated with mold, it is best to contact a reputable duct cleaning company. Most of them will be happy to inspect your system and identify the source of the mold. Mold begins with moisture, and the most likely culprit is your cooling system's evaporator coils. Leaky return ducts are another common cause of water.

Handymanreseda Covers the Following Towns nearby Reseda, Los Angeles. 

Winnetka, Northridge, Tarzana, Canoga Park, Encino, North Hills, Woodland Hills, Van Nuys, Panorama City, Granada Hills, Mission Hills, Chatsworth, Sherman Oaks, Topanga, Pacoima, San Fernando, Valley Village, Pacific Palisades, West Hills.  

contact us
Recent posts
Call now to more
(747) 600-0057
Business Hours
crossmenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram